Otter Creek Labs Lithium 9

The lithium 9 is compatible with 3 lug and booster/piston mounts and can be used on 9mm handguns. Specs. Length: 6” (no mount); Weight: 5.7 oz (no mount);

The Otter Creek Lithium 9 was designed from the ground up to offer the best weight to suppression ratio of any 9mm SMG/PCC suppressor on the market. It uses internal features and venting to help reduce port pop on direct blowback operating systems and features industry standard 1.375×24 rear mounting threads to easily be adapted to the mounting system of your choice. The OCL Lithium 9 is compatible with 3-Lug booster/piston mounts and can be used on 9mm handguns.

Please Note: Because the Lithium 9 has a smaller blast chamber than most typical rifle suppressors a direct thread mount must be used if it’s being fired on 350 legend, 300 HAMR, 223/5.56, 308 and 6.5 Creedmoor and other similar cartridges so that you have maximum blast chamber volume not being occupied by a muzzle device.

Technical Specifications:

• Length: 6″
• Diameter: 1.5″
• Weight: 5.7 oz
• Material: Grade 5 Titanium
• Full Auto Rated!

Barrel Length and Firing Restrictions:

• 9mm: Full auto rated, no barrel length restrictions.
• 300 blackout subsonic: Full auto rated, no barrel length restrictions.
• 300 blackout supersonic: Semi auto, 7 inch barrels and longer.
• 357 magnum lever action rifles: Yes, 4 inch barrel length restriction.
• 350 legend, 300 HAMR: Semi auto, 16 inch barrels and longer
• 223/5.56: Semi auto with intent to keep temperature down/low volume use, barrel must be 16 inches or longer.
• 308 Winchester/6.5 Creedmoor: Bolt action hunting applications only/low volume use, 20 inch barrel or longer.

What’s in the Box:

• OCL Lithium 9 Suppressor
• 1/2×28 Titanium Direct Thread Mount
• Tube Clamp
• Socket Tool
• Owners Manual